.jpg)
The five common problems and solutions about sand-making crusher
2014-12-31
In sand-making production plant, sand-making crusher of some sandstone manufacturer always appear some problems, and the customer doesn't know the sand-making crusher, so these problems are difficult to be solved, it also greatly influence the customer's production efficiency. In fact, the emergence of these problems are due to the non-timely maintenance for sand-making crusher.
.jpg)
China Juxin sum up the following five common problems and solutions about sand-making crusher:
1.When the crusher is running, the housing swings seriously. There 3 reasons:
1)the quick-wear part of the impeller is damaged seriously, the operater should change a new one;
2)the feeding size is too large, please feed the crusher the materials with appropriate size;
3)the channel of impeller is blocked, and remove the blocker and dredge it.
2.Too large discarge size, that's beause of the loose triangle belt, you should tense it.
3.Too large Air resistance. The seal cover of the bearing is blocked, remove the blocker.
4.Too high temperature of the bearing. Beause the bearing is damaged, at the same time, the operature should change the new bearing.
5.Some noise of metal impacting on metal. The liners or the quick-wear parts are loose or lost. The operater of sand-making crusher should fasten these parts.
At present, according to these feedbacks from the customers, China Juxin Machinery sum up these five common problems and solutions about sand-making crusher, we sincerely hope they are helpful to the customers, and our sand-making crusher will bring more and more benifits to you!
