.jpg)
How to expand the service life of sand-making crusher
2014-12-30
At present, with the rapid development of our state-building, the natural sand can not meet the requirment. However, the artifical sand is developed rapidly. China Juxin Sand-making crusher plays an important role in the sand-making plant, so the solid and durable working parts is the key to the service life of sand-making crusher.
.jpg)
China Juxin sum up some tips for expanding the service life of sand-making crusher:
1.Check the vortex chamber and shut door of sand-making crusher before start it, that mainly prevent the material rushing from the vortex chamber door.
2.Check the impeller rotation direction from the mouth. Impeller should be counterclockwise rotation, otherwise the motor wiring should be adjusted. And China Juxin remind that the operater must pay more attention on the impeller rotation direction.
3.Pay attention to a certain order when start the production line. In general, the startup sequence of sand-making crusher and conveyor equipment is listed: the blowdown -- the sand-making crusher -- the feeding; and crusher must be started with no load, the feeder can give the material after crusher operating normally. In contrast to the boot order stop order.
4.Filling particles in strict accordance with the specified requirements, if it is greater than the specified material into the crusher is forbidden, otherwise, and that will cause the impeller imbalance and excessive wear of impeller base to jam impeller passage and center into the feed tube to cause the crusher can not work normally, found a large piece of material should be ruled out in time. And prevent the broken material into the crusher.
5.Stop discharging device, first stop feeding in time, otherwise, it will damage the crushing impeller and cause motor burning.
6.Dry oil lubrication way is for China Juxin sand-making crusher, the adding quantity is for 1/2 - two-thirds of the bearing cavity. Notice the maintenance of the bearing when the crusher ia on.
7.In order to ensure its high efficiency and energy-saving, the triangle belt of sand-making crusher should be adjusted properly, so that you can ensure uniform triangle tape bearing, double motor drive, on both sides of the triangle tape should be grouped selection, and its every length as consistent as possible.When parking to pay attention to wear and tear on parts such as impeller, timely replacement of wearing parts.
China Juxin Crusher: Combining the Actual Condition, we py more attention to the configuration of all equipment for the whole sand-making production plant, especially for the model selection of sand-making crusher, that's good for maximizing the performance of all the machine.
