The solution and work blockages of jaw crusher(I)

Jaw crusher is just like the human body, the excessive work and wrong operation make it come out some work blockages. China Juxin summarize some work blockages of jaw crusher, at the same time, for these work blockages, we have found the specific reasons and carried out the correspondent solutions. And the detailed information is listed as below:

WORKING BLOCKAGES	REASON	SOLUTION
Water get into the oil feeding system	the pressure intensity of water in filtering cooler is higher than pressure intensity of oil in oil feeding system	To keep the pressure intensity of water to be less 0.5Pa than the pressure intensity of oil
Oil of oil box substantially decline and returning oil decrease	through the sealing gasket of bearing:   1) the feeding oil is overmuch;   2) something is wrong with the seal of the bearing	1)to adjust the feeding oil;   2)to stop the crusher, overhaul the seal of the bearing
No cooling water around frictional part of jaw crusher	--	Add the  feeding oil, and pay more attention to the temperature of oil; when the temperature is higher, please stop the crusher
the crusher is a violent shaking	the bolt in the connection is loose	To strengthen the inspection work of the connection, when the connection is unusual, please stop the crusher immediately and maintenance it
crusher is violent shaking and there are loud metallic noise	the liner plate is loose	To stop the crusher and check the fastening situation of liner plate. If so, the operating worker must fasten the liner plate, and then take the run-in test until no abnormal noise

More detailed information, please note the next news.