Your position : Home > Products > Sand & Stone Equipment > Feeding Equipment
■ Overview
Function
Trough feeder (ore feeder) can be set up on the ground can also be hoisting the ore bin on the discharge port. Slot back plane for reciprocating movement, the pumping of 20-60 times/min, stroke is 20-200mm. Stroke can be adjusted appropriately eccentric device, eccentricity of stroke in half. Trough feeder feed trough width of about 2-2.5 times the maximum particle size. The biggest chute feeder can meet the particle size is less than 500mm to the mining of iron ore, always used as ore feeder.
Operating principle
Trough feeder can be set up on the ground and can also be hoisting the ore bin on the discharge port. Slot backplane for reciprocating movement, the pumping of 20-60 times/min, stroke is 20-200mm. Stroke can be adjusted appropriately eccentric device, eccentricity of stroke in half. According to some mine, for cohesive ore, eccentricity should not be less than 30mm. Trough feeder feed trough width of about 2-2.5 times the maximum particle size. The biggest through feeder can meet the particle size is less than 500mm to the mining of iron ore. Most common specification is 980*1240 through feeder, the feeder size for the 350-0mm, for a 400*600 jaw crusher feeding equipment.
Features
1 Simple structure, uniform feeding, continuous performance, adjustable exciting force.
2 Subject to change and control flow, easy to operate, can be evenly adjusted to the amount of ore.
3 Low noise, low power consumption, good regulating performance, without clogging phenomenon.
■ CASE